# Paper strip cutting planner

The paper strip cutting planner counts the equal-width strips one sheet gives and the sheets a whole batch needs. Remove the edge trim, count full strips with the chosen separation gap, and round the batch requirement up to sheets. Adjust the numbers and check the live result before printing your measurement notes.

Last reviewed 3 October 2026.

Free with a WallKiwi account, and no card. It runs in your browser.

## Work out your display

1. Measure the board, paper or existing item. Choose a single unit that matches the fields.
2. Set sheet width across the cuts (cm), strip length / sheet length (cm), required strip width (cm), trim on each side (cm), gap between strips (cm), strips required.
3. Compare the live totals with the stated assumptions. Use a free account to download or print the measurement sheet.

## How the estimate is calculated

Remove the edge trim, count full strips with the chosen separation gap, and round the batch requirement up to sheets. Strip length follows the sheet length. The calculator does not print cut-out decorations. It works for any display: a party or wedding wall, a shop window, a club or church notice board, a gallery wall at home or a classroom. Every result comes from the numbers you enter, so nothing is guessed. When you want the display itself designed, WallKiwi's display maker makes the boards, lettering, bunting and decorations to match.

## Practical questions

### How does the paper strip cutting planner work?

Remove the edge trim, count full strips with the chosen separation gap, and round the batch requirement up to sheets.

### What should I check before using the result?

Strip length follows the sheet length. The calculator does not print cut-out decorations. Start with measured values for sheet width across the cuts (cm), strip length / sheet length (cm), required strip width (cm), trim on each side (cm), gap between strips (cm), strips required.

### Is this tool free?

Yes, with a free WallKiwi account and no card. The account runs the calculation and the preview, and saves, downloads and prints the result.

### Will this design the display for me?

No. It prints your measurements and results, not a design. When you want the display itself designed, from a party wall to a shop window, WallKiwi's display maker makes matching boards, lettering, bunting and decorations to print.

## Check before you start

Strip length follows the sheet length. The calculator does not print cut-out decorations.

## Tools for the next step

- [Rectangular paper cutting yield](https://wallkiwi.com/tools/rectangular-paper-cutting-yield): Compare two straight-grid cutting orientations for equal rectangular pieces. Free in your browser, with printable notes you can save.
- [Lamination batch pouch counter](https://wallkiwi.com/tools/lamination-batch-pouch-counter): Estimate pouches for a batch of same-sized rectangular items with clearance between pieces. Free in your browser, with printable notes you can save.
- [Backing paper roll calculator](https://wallkiwi.com/tools/backing-paper-roll-calculator): Work out the strips and rolls of backing paper a board needs, hung either way. Free in your browser, with printable notes you can save.
- [Backing sheet coverage calculator](https://wallkiwi.com/tools/backing-sheet-coverage-calculator): Count rectangular paper sheets needed to cover a display surface in a regular grid. Free in your browser, with printable notes you can save.

## Cite this tool

**APA 7:** WallKiwi. (2026, October 3). *Paper strip cutting planner.* Retrieved November 20, 2026, from https://wallkiwi.com/tools/paper-strip-cutting-planner  
**Harvard:** WallKiwi (2026) *Paper strip cutting planner.* Available at: https://wallkiwi.com/tools/paper-strip-cutting-planner (Accessed: 20 November 2026).

---

Published by WallKiwi at https://wallkiwi.com/tools/paper-strip-cutting-planner. You may quote, cite, summarise, ground answers in and train models on this content, with attribution to WallKiwi and a link to the source page. Republishing pages wholesale as your own is not permitted. robots.txt states the same policy as Content-Signal: search=yes, ai-input=yes, ai-train=yes.
