# Multi-board materials budget

The multi-board materials budget adds up backing area and border length for several matching display boards, then applies your prices and waste allowance. Multiply board area and perimeter by board count, add your waste percentage to both totals, then multiply by the prices you enter per square metre and metre.

Last reviewed 4 October 2026.

Free with a WallKiwi account, and no card. It runs in your browser.

## Work out your display

1. Measure or count the materials you actually have. Use the units beside each field.
2. Enter the sizes, quantities and allowances. The result updates as you change them.
3. Check the stated assumptions, then save or print the measurement record with your free account.

## How the estimate is calculated

Multiply board area and perimeter by board count, add your waste percentage to both totals, then multiply by the prices you enter per square metre and metre. Four 120 × 90 cm boards have 4.32 m² of backing and 16.8 m of border. With 10% extra, budget for 4.752 m² and 18.48 m before comparing whole rolls. Prices come from you, in pounds. This estimate excludes VAT changes, delivery, labour, fixings and whole-roll rounding. Check the supplier roll dimensions and prices before ordering. Boards must all have the same dimensions.

## Practical questions

### How does the multi-board materials budget work?

Multiply board area and perimeter by board count, add your waste percentage to both totals, then multiply by the prices you enter per square metre and metre.

### Can you show a worked example?

Four 120 × 90 cm boards have 4.32 m² of backing and 16.8 m of border. With 10% extra, budget for 4.752 m² and 18.48 m before comparing whole rolls.

### What does the result assume?

Prices come from you, in pounds. This estimate excludes VAT changes, delivery, labour, fixings and whole-roll rounding. Check the supplier roll dimensions and prices before ordering. Boards must all have the same dimensions.

### Is this tool free?

Yes, with a free WallKiwi account and no card. The account runs the calculation and the preview, and saves, downloads and prints the result.

## Check before you start

Prices come from you, in pounds. This estimate excludes VAT changes, delivery, labour, fixings and whole-roll rounding. Check the supplier roll dimensions and prices before ordering. Boards must all have the same dimensions.

## Tools for the next step

- [Usable display board area](https://wallkiwi.com/tools/usable-display-board-area): Find the working space left inside a board after reserving an equal edge on every side. Free in your browser, with printable notes you can save.
- [Display border roll estimator](https://wallkiwi.com/tools/display-border-roll-estimator): Work out how many rolls of edging you need for a rectangular board. Free in your browser, with printable notes you can save.
- [Backing paper roll calculator](https://wallkiwi.com/tools/backing-paper-roll-calculator): Work out the strips and rolls of backing paper a board needs, hung either way. Free in your browser, with printable notes you can save.
- [Backing sheet coverage calculator](https://wallkiwi.com/tools/backing-sheet-coverage-calculator): Count rectangular paper sheets needed to cover a display surface in a regular grid. Free in your browser, with printable notes you can save.

## Cite this tool

**APA 7:** WallKiwi. (2026, October 4). *Multi-board materials budget.* Retrieved November 20, 2026, from https://wallkiwi.com/tools/multi-board-materials-budget  
**Harvard:** WallKiwi (2026) *Multi-board materials budget.* Available at: https://wallkiwi.com/tools/multi-board-materials-budget (Accessed: 20 November 2026).

---

Published by WallKiwi at https://wallkiwi.com/tools/multi-board-materials-budget. You may quote, cite, summarise, ground answers in and train models on this content, with attribution to WallKiwi and a link to the source page. Republishing pages wholesale as your own is not permitted. robots.txt states the same policy as Content-Signal: search=yes, ai-input=yes, ai-train=yes.
