# House number template

A house number template is a printed number at an exact height that you trace onto a door, gate or bin and paint, or cut out and stick on. This tool prints any number or short name from 5 to 30 cm tall, one character to a piece, with a baseline and centre line for lining it up.

Last reviewed 3 October 2026

Free, with no card. It runs in your browser.

## Start from one of these

- [Wheelie bin numbers to print](https://wallkiwi.com/tools/house-number-template/wheelie-bin-numbers)
- [Front door number template](https://wallkiwi.com/tools/house-number-template/front-door-number)
- [Gate and fence number template](https://wallkiwi.com/tools/house-number-template/gate-and-fence-numbers)
- [Letterbox and mailbox post number](https://wallkiwi.com/tools/house-number-template/letterbox-number)
- [Large garage door and shed numbers](https://wallkiwi.com/tools/house-number-template/shed-and-garage-numbers)
- [House name sign template](https://wallkiwi.com/tools/house-number-template/house-name-sign-template)

## How to make it

1. Type the number or a short name, up to 14 characters, and choose the height of the numerals, from 5 to 30 cm.
2. Choose outline to trace and paint, or solid to cut out and stick on, and a classic or rounded style.
3. Press Make it, print at 100% and check the height with a ruler: the baseline and the top line on each piece are exactly the height you chose.

## How it prints

Every character prints as its own piece at the height you choose, measured the way you would check it with a ruler: from the bottom to the top of a numeral or a capital letter. Each piece has a solid baseline and a fainter top line exactly that height apart, and a dashed line through the middle of the character. Use the baseline to set every character on the same level and the centre line to space them evenly; the numbers are drawn as shapes, not typed text, so they print crisply at any size. Pieces share a sheet where they fit; a character too big for the printable part of a sheet, such as any 30 cm numeral, prints across two or more sheets with a 1 cm glue strip.

The outline style is a trace template, not a cut stencil. The holes in 0, 4, 6, 8, 9 and A are closed shapes, so if you cut the outline out the middles would fall away. Instead, tape the sheet in place, slip carbon or graphite paper underneath, or rub soft pencil on the back, and trace along the inside edge of the line, then paint inside the traced shape. The solid style prints filled characters in black or a colour to cut round and stick on, which suits a wheelie bin or a shed door under clear tape, or a temporary number while you wait for a proper plaque.

## Tip

Before you trace, tape all the pieces in place and step back to the street or the pavement. Spacing that looks right at arm's length often looks too tight from 10 m away.

## Questions people ask

### What size should house numbers be?

For a front door, 7.5 to 10 cm numbers are usual and read from the pavement. On a gate, a fence or a house seen from the road, 15 cm or more helps, especially for delivery drivers and emergency services at night. Wheelie bin numbers are usually 15 to 20 cm, and garage doors can take 25 to 30 cm.

### Is this a stencil?

No. The outline style is a trace template. A true cut stencil needs small bridges to hold the middles of 0, 4, 6, 8, 9 and A in place, and these numbers do not have them. Trace round the outline and paint inside it, or print the solid style and cut it out to stick on.

### What paint should I use for a door or gate number?

Use exterior paint made for the surface: exterior gloss or satinwood on a painted wooden door, a paint for metal on a metal gate, and a masonry paint on render or brick. A small artist's brush gives the cleanest edge. Two thin coats look better than one thick one, and low-tack masking tape along the straight edges keeps them sharp.

### How do I put a number on a wheelie bin?

Clean the bin with warm soapy water and let it dry. Print the solid style, cut the numbers out and stick them on, then cover them with wide clear packing tape or sticky-back plastic, overlapping the edges by a couple of centimetres. For a permanent number, trace the outline and paint it with a paint made for plastic.

### How far apart should the numbers be?

Space them by eye using the dashed centre lines, leaving roughly a quarter to a third of the height between characters. The tool's summary gives the width of the whole number as the lettering would set it, which helps you check it fits before you start.

## Ideas for using it

- [Moving into a new home](https://wallkiwi.com/ideas/new-home)
- [Holiday let signs and guest information](https://wallkiwi.com/ideas/holiday-let)

## More free printables

- [Gallery wall planner](https://wallkiwi.com/tools/gallery-wall-planner): Plan a gallery wall of frames: a scale plan with every nail height worked out, and true-size paper templates to tape to the wall. Free A4 PDF.
- [Shop sign maker](https://wallkiwi.com/tools/shop-sign-maker): Make a printable shop sign for a door or window: open and closed, opening hours, a sale or a notice such as back in 10 minutes. Free A4 or A3 PDF.
- [Plant label maker](https://wallkiwi.com/tools/plant-label-maker): Make printable plant labels: pointed stakes, row markers, pot labels and hanging tags at true size, with the variety and a sown date. Free A4 PDF.

## Cite this page

**APA 7:** WallKiwi. (n.d.). *House number template.* Retrieved November 20, 2026, from https://wallkiwi.com/tools/house-number-template  
**Harvard:** WallKiwi (no date) *House number template.* Available at: https://wallkiwi.com/tools/house-number-template (Accessed: 20 November 2026).

---

Published by WallKiwi at https://wallkiwi.com/tools/house-number-template. You may quote, cite, summarise, ground answers in and train models on this content, with attribution to WallKiwi and a link to the source page. Republishing pages wholesale as your own is not permitted. robots.txt states the same policy as Content-Signal: search=yes, ai-input=yes, ai-train=yes.
