# Display cord length estimator

The display cord length estimator works out the length of cord or ribbon to cut, including both tails and a spare allowance. Add the span and both end tails, then increase that length by the supplied percentage. Adjust the numbers and check the live result before printing your measurement notes.

Last reviewed 3 October 2026.

Free with a WallKiwi account, and no card. It runs in your browser.

## Work out your display

1. Measure the board, paper or existing item. Choose a single unit that matches the fields.
2. Set straight span (cm), tail at each end (cm), your extra allowance (%).
3. Compare the live totals with the stated assumptions. Use a free account to download or print the measurement sheet.

## How the estimate is calculated

Add the span and both end tails, then increase that length by the supplied percentage. This is a straight-run estimate. Sag, knots and bends require your own allowance and the right material. It works for any display: a party or wedding wall, a shop window, a club or church notice board, a gallery wall at home or a classroom. Every result comes from the numbers you enter, so nothing is guessed. When you want the display itself designed, WallKiwi's display maker makes the boards, lettering, bunting and decorations to match.

## Practical questions

### How does the display cord length estimator work?

Add the span and both end tails, then increase that length by the supplied percentage.

### What should I check before using the result?

This is a straight-run estimate. Sag, knots and bends require your own allowance and the right material. Start with measured values for straight span (cm), tail at each end (cm), your extra allowance (%).

### Is this tool free?

Yes, with a free WallKiwi account and no card. The account runs the calculation and the preview, and saves, downloads and prints the result.

### Will this design the display for me?

No. It prints your measurements and results, not a design. When you want the display itself designed, from a party wall to a shop window, WallKiwi's display maker makes matching boards, lettering, bunting and decorations to print.

## Check before you start

This is a straight-run estimate. Sag, knots and bends require your own allowance and the right material.

## Tools for the next step

- [Display fixing position spacer](https://wallkiwi.com/tools/display-fixing-position-spacer): List equal fixing positions along a straight edge using measured end insets. Free in your browser, with printable notes you can save.
- [Usable display board area](https://wallkiwi.com/tools/usable-display-board-area): Find the working space left inside a board after reserving an equal edge on every side. Free in your browser, with printable notes you can save.
- [Display border roll estimator](https://wallkiwi.com/tools/display-border-roll-estimator): Work out how many rolls of edging you need for a rectangular board. Free in your browser, with printable notes you can save.
- [Backing paper roll calculator](https://wallkiwi.com/tools/backing-paper-roll-calculator): Work out the strips and rolls of backing paper a board needs, hung either way. Free in your browser, with printable notes you can save.

## Cite this tool

**APA 7:** WallKiwi. (2026, October 3). *Display cord length estimator.* Retrieved November 20, 2026, from https://wallkiwi.com/tools/display-cord-length-estimator  
**Harvard:** WallKiwi (2026) *Display cord length estimator.* Available at: https://wallkiwi.com/tools/display-cord-length-estimator (Accessed: 20 November 2026).

---

Published by WallKiwi at https://wallkiwi.com/tools/display-cord-length-estimator. You may quote, cite, summarise, ground answers in and train models on this content, with attribution to WallKiwi and a link to the source page. Republishing pages wholesale as your own is not permitted. robots.txt states the same policy as Content-Signal: search=yes, ai-input=yes, ai-train=yes.
